Switching On/Off - Festool PHC 18 Notice D'utilisation

English
5 Parts of the device / Functional
description
[1-1] Output compatible with
USB‑C TM
[1-2] On/off switch
[1-3] USB-A output
[1-4] LED display
[1-5] Inductive charging surface
The specified illustrations appear at the
beginning of the Operating Instructions.
6 Battery pack
Before using the battery pack, check
that the battery interface is clean. Any
contamination of the battery interface
may impair correct contact and lead to
the contacts being damaged.
22
A faulty contact may result in the ma­
chine overheating or being damaged.
[2A]
[2B]
Further information about the
battery pack with capacity indi­
cator can be found in the corre­
sponding operating manual.
7 Operation
7.1

Switching on/off

Switching on
► Press on/off switch [1-2].
Remove the battery
pack.
Insert the battery
pack – until it
clicks into place.