Connecting The Ac Adapter - Elmo HV-110u Mode D'emploi

Specifications of the analog RGB input terminal of this product
Signal allocation
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
DSUB 15P shrink terminal (Female)
Pin assignment
Pin No. Name
1 Video signal (Red)
2 Video signal (Green)
3 Video signal (Blue)
4 N.C
5 GND
(3) Connecting to the PC with a USB cable.
Connect a USB cable to the [USB] terminal on the side of the base unit.
Note
• The USB2.0 compliant cable is recommended.
• If you plug a USB cable with the power supply to this product and the PC on, the PC
may not recognize this product.
• Depending on the USB environment of PC or the USB2.0 compliant cable is
recommended. Peripheral units, the image transfer may be disturbed.
• This does not guarantee operations in any environment.

(4) Connecting the AC adapter

Connect the DC plug of the supplied AC adapter to the [DC IN 12V] terminal on the side of
the main unit before inserting the AC adapter into an outlet.
Note
• To protect this product and peripheral devices, unplug the power plug of the AC
adapter and turn OFF the power switches on all other devices before connecting the
video cable.
• Hold the plug of the cable to plug in/unplug the power plug of the AC adapter or the
video cable.
English
Video signal : Analog 0.7V(p-p) with 75Ω terminated
Horizontal synchronized signal : TTL level (Positive/negative polarity)
Vertical synchronized signal : TTL level (Positive/negative polarity)
Pin No. Name
6 GND (Red)
7 GND (Green)
8 GND (Blue)
9 N.C
10 GND
Pin No. Name
11 GND
12 N.C
13 Horizontal sync. signal
14 Vertical sync. signal
15 N.C
19