Operation Procedure; Presentation Using Printed Materials Etc. (Camera Mode); Changing The Size Of An Object (Manual Zoom) - Elmo HV-110u Mode D'emploi

3

OPERATION PROCEDURE

Presentation using printed materials etc. (Camera Mode)

Changing the size of an object
(Manual Zoom)
By pushing the camera head up/down, the object in
display on the monitor screen can be zoomed in/out.
Pushing the camera head down : To enlarge the object.
Pushing the camera head up
To enlarge the object in display on the monitor screen
even larger than when the camera head is in the lowest
horizontal position (object enlarged at the highest
level), use the digital zoom functions (refer to page 21).
Note
• For best results, we recommend LCD projectors over DLP projectors to be used with
HV-110u. A better image may be produced by selecting "Graphics" mode with DLP
projector.
Note
• When shooting glossy documents, etc, the images may be hard to see due to glare,
etc. In such cases, place the anti-glare sheet, supplied, over the area where glare is
occurring. This will reduce glare and the images will become easier to see.
20
English
: To minify the object.