Setting Up And Storing; Setting Up - Elmo HV-110u Mode D'emploi

2

SETTING UP AND STORING

Setting Up

1
Slide the stage open lever at the top of the
main unit.
The stage is unlocked and unfolded to the right and
left.
Note
• When the accessory case is housed inside, be
careful not to drop it.
2
Connect the analog RGB cable to the
analog RGB output terminal [RGB OUT].
Connect the cable to the unit equipped with the
analog RGB input terminal (e.g. the projector or
monitor).
Note
• Hold the plug of cable to connect each cable.
• Before starting connection, turn OFF the power
supply to each unit.
14
English
RGB OUT terminal
• To projector
• To PC monitor