Correcting The White Balance (White Balance); Adjusting The Brightness (Brightness) - Elmo HV-110u Mode D'emploi

Correcting the white balance
(White Balance)
Set [AWB] (Auto White Balance Switch) to [AUTO] to
correct the white balance automatically.
Note
• If the accurate auto-adjusting is disabled for some objects or the source of light, shoot
a white object to adjust the white balance automatically, and then set [AWB] (Auto
White Balance Switch) to [LOCK] to fix the white balance.
Adjusting the brightness
(Brightness)
Press the [ ] or [
buttons) to adjust the image brightness.
[ ] button : To brighten the image.
[ ] button : To darken the image.
Holding down the [
the same time for several seconds restores the
brightness value to its factory setting.
] buttons (Brightness
] and [ ] buttons at
English
23