Rear - Elmo HV-110u Mode D'emploi

Rear

No. Name
AWB [AUTO/LOCK]
(1)
(Auto White Balance Switch)
FLICKER [60/50]
(2)
(Flickerless Switch)
MODE [TEXT/GRAPHICS]
(3)
(Mode Switch)
RGB IN
(4)
(Analog RGB Input Terminal)
RGB OUT
(5)
(Analog RGB Output Terminal)
English
(2)
(1) (3)
(4)
(5)
To change the auto white balance operation.
[AUTO]: To set the white balance to auto-
correcting.
[LOCK]: To set the white balance to fi xing.
To change the flicker rate according to the local
power frequency.
[60]: 60Hz regions
[50]: 50Hz regions
To switch the image mode.
[TEXT]: To sharpen B&W characters and
lines in documents.
[GRAPHICS]: To show color images such as
color drawings and photos vividly.
To output the input image from the analog RGB
output terminal to this terminal when [PC] is
selected by the image input selection switch.
To output analog video signal to the projector, the
PC monitor or other RGB input devices.
Function
P.18
P.18
13