Setting Up - Elmo L-1ex Mode D'emploi

2

SETTING UP

Setting Up
N o t e
• Carry the product by holding the lower part
of the main unit in both hands. Never hold the
product by the column or the camera head.
• Pay attention to prevent the camera head from
knocking against a desk or any hard object.
1
Tu r n t h e c a m e r a c o l u m n i n t h e
direction shown in the figure.
N o t e
• Never turn the column in the opposite direction.
• Be sure to hold the column when turning it.
Never hold the camera head.
2
Rotate the camera head.
N o t e
• Proper set up position of the camera head is
as shown in the figure on the right. Never apply
excessive force to the camera.
96
English
180°
90°