Pattfield Ergo Tools PE-EKS 1835 Notice Originale page 310

•
The product meets the requirements of EN 61000-3-11 and is
subject to special connection conditions. This means that use of
the product at any freely selectable connection point is not allo-
wed.
•
Given unfavorable conditions in the power supply the product can
cause the voltage to fluctuate temporarily.
•
The product is intended solely for use at connection points that
a) do not exceed a maximum permitted mains system impedance
of Z sys = 0.3 Ω, or
b) have a continuous current-carrying capacity of the mains of at
least 100 A per phase.
•
As the user, you are required to ensure, in consultation with your
electric power company if necessary, that the connection point at
which you wish to operate the product meets one of the two requi-
rements, a) or b), named above.
GB
Anl_PE_EKS_1835_SPK7.indb 310 Anl_PE_EKS_1835_SPK7.indb 310
- 310 -
17.11.2017 12:33:26 17.11.2017 12:33:26