Operation; Connecting To The Mains Supply; Switching On/Off - Pattfield Ergo Tools PE-EKS 1835 Notice Originale

Filling the oil tank:
•
Place the chainsaw on a flat surface.
•
Clean the area around the oil tank cover (Fig. 10/Item A) and then
clean the oil tank cover.
•
Fill the tank with saw chain oil. In the process, make sure that no
dirt enters the tank, as this could cause the oil nozzle to become
blocked.
•
Close the oil tank cover.

6. Operation

6.1 Connecting to the mains supply

•
Connect the power cable to a suitable extension cable. Make sure
that the extension cable is designed for the power rating of the
chainsaw.
•
Secure the extension cable as shown in Fig. 12 to protect it
against pulling forces and accidental disconnection.
•
Connect the extension cable to a professionally installed safety
mains outlet with ground contact.
GB
We recommend using a cable with a bright and highly visible color,
e.g. red or yellow. This will reduce the risk of accidentally damaging it
with the chainsaw.
6.2 Switching on/off
Switching on
•
Hold the chainsaw by the handles with both hands as shown in
Fig. 13 (thumbs under the handles).
•
Press and hold the safety lock-off (Fig. 1/Item 5).
•
Switch on the chainsaw at the ON/OFF switch. You can then re-
lease the safety lock-off.
Anl_PE_EKS_1835_SPK7.indb 296 Anl_PE_EKS_1835_SPK7.indb 296
- 296 -
17.11.2017 12:33:25 17.11.2017 12:33:25