Pattfield Ergo Tools PE-EKS 1835 Notice Originale page 286

badly maintained electric tools.
f) Keep your cutting tools sharp and clean. Carefully maintained
cutting tools with sharp cutting edges will jam less and are easier
to control.
g) Make sure to use electric tools, accessories, attachments,
etc. in accordance with these instructions. Take the condi-
tions in your work area and the job in hand into account.
Using electric tools for any purpose other than the one for which
they are intended can lead to dangerous situations.
5. Service
a) Have your electric tool repaired only by trained personnel
using only genuine spare parts. This will ensure that your elec-
tric tool remains safe to use.
Special safety instructions for chainsaws
•
When the chainsaw is running make sure that you keep all
parts of your body away from the chainsaw. Before starting
up the chainsaw make sure that it is not touching anything.
When you are working with a chainsaw, a single moment of ca-
GB
relessness is all it takes for clothing or parts of your body to get
caught by the chainsaw.
•
Always hold the chainsaw securely with your right hand on
the rear handle and your left hand on the front handle. Hol-
ding the chainsaw with your hands in other positions increases
the risk of injury and is therefore not allowed.
•
Wear safety goggles and ear protection. Other safety equip-
ment for the head, hands, legs and feet is recommended.
Correct protective clothing reduces the risk of injury caused by
catapulted chips or in the event of accidental contact with the
chainsaw.
•
Never use the chainsaw up a tree. You risk injuring yourself if
you use the chainsaw up a tree.
•
Always maintain a steady standing position and only use
Anl_PE_EKS_1835_SPK7.indb 286 Anl_PE_EKS_1835_SPK7.indb 286
- 286 -
17.11.2017 12:33:24 17.11.2017 12:33:24