Pattfield Ergo Tools PE-EKS 1835 Notice Originale page 308

Cause
Saw chain
dry
Chain bra-
ke does not
work
Chain/guide
rail hot
Chainsaw
juddering,
vibrating or
not sawing
properly
GB
Anl_PE_EKS_1835_SPK7.indb 308 Anl_PE_EKS_1835_SPK7.indb 308
Fault
- No oil in the tank
- Oil tank cap breather
blocked
- Oil outlet blocked
- Problem with the switch
mechanism in the front
hand guard
- No oil in the tank
- Oil tank cap breather
blocked
- Oil outlet blocked
- Blunt chain
- Chain tension too loose
- Blunt chain
- Worn chain
- Saw teeth pointing in
the wrong direction
- 308 -
Remedy
- Fill up with oil.
- Clean the oil tank cap.
- Clear the oil outlet.
- Consult a specialist
workshop.
- Fill up with oil.
- Clean the oil tank cap.
- Clear the oil outlet
- Re-sharpen or replace
the chain.
- Adjust the chain tensi-
on.
- Re-sharpen or replace
the chain.
- Replace the chain.
- Reinstall the saw chain
with the teeth facing in
the correct direction.
17.11.2017 12:33:26 17.11.2017 12:33:26