Handle under load
Vibration emission value front handle
a
= 4.039 m/s
2
h
Vibration emission value rear handle
a
= 5.781 m/s
2
h
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in accordance with a
standardized testing method. It may change according to how the
electric equipment is used and may exceed the specifi ed value in ex-
ceptional circumstances.
The specifi ed vibration value can be used to compare the equipment
with other electric power tools.
The specifi ed vibration value can be used for initial assessment of a
harmful eff ect.
Keep the noise emissions and vibrations to a minimum.
•
Only use appliances which are in perfect working order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever necessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
5. Before starting the equipment
Before you connect the equipment to the mains supply make sure
that the data on the rating plate are identical to the mains data.
Anl_PE_EKS_1835_SPK7.indb 293
Anl_PE_EKS_1835_SPK7.indb 293
2
- 293 -
GB
17.11.2017 12:33:24
17.11.2017 12:33:24