General Safety Instructions For Electric Tools - Pattfield Ergo Tools PE-EKS 1835 Notice Originale

Masquer les pouces Voir aussi pour PE-EKS 1835:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 41

General safety instructions for electric tools

Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regulations and instructions
may result in an electric shock, fi re and/or serious injury.
Keep all safety regulations and instructions in a safe place for
future use.
The term "electric tool" used in the safety instructions refers to elec-
tric tools operated from the mains power supply (with a power cable)
and to battery operated electric tools (without a power cable).
1. Workplace safety
a) Keep your work area clean and well illuminated. Untidy or un-
lit work areas can result in accidents.
b) Do not operate the electric tool in an environment where
there is a risk of explosions and where there are infl amma-
ble liquids, gases or dust. Electric tools produce sparks which
could set the dust or vapours alight.
c) Keep the electric tool out of the reach of children and other
persons. If there is a distraction, you may lose control of the ap-
pliance.
2. Electrical safety
a) The connector plug from this electric tool must fi t into the
socket. The plug should never be altered in any way. Never
use adapter plugs together with earthed electric tools. Un-
altered plugs and correct sockets reduce the risk of an electric
shock.
b) Avoid bodily contact with earthed surfaces such as pipes,
heating, ovens and fridges. The risk of electric shock is increa-
sed if your body is earthed.
Anl_PE_EKS_1835_SPK7.indb 283
Anl_PE_EKS_1835_SPK7.indb 283
- 283 -
GB
17.11.2017 12:33:23
17.11.2017 12:33:23

Publicité

Table des Matières
loading

Table des Matières