Layout And Items Supplied - Pattfield Ergo Tools PE-EKS 1835 Notice Originale

2. Layout and items supplied

2.1 Layout (Fig. 1-3)
1. Claw stop
2. Front hand guard
3. Front handle
4. Rear handle
5. Safety lock-off
6. ON/OFF switch
7. Oil tank cover
8. Chain wheel cover
9. Fixing screw for the chain wheel cover
10. Chain tensioning screw
11. Chain oil fi ll level indicator
12. Cable strain-relief clamp
13. Power cable
14. Rear hand guard
15. Cutter rail
16. Saw chain
17. Cutter guard
GB
2.2 Items supplied
Please check that the article is complete as specifi ed in the scope
of delivery. If parts are missing, please contact our service center or
the sales outlet where you made your purchase at the latest within 5
working days after purchasing the product and upon presentation of
a valid bill of purchase. Also, refer to the warranty table in the service
information at the end of the operating instructions.
•
Open the packaging and take out the equipment with care.
•
Remove the packaging material and any packaging and/or trans-
portation braces (if available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for transport damage.
Anl_PE_EKS_1835_SPK7.indb 290 Anl_PE_EKS_1835_SPK7.indb 290
- 290 -
17.11.2017 12:33:24 17.11.2017 12:33:24