Antari FT-20 Manuel D'utilisation page 22

Operation
Control Panel Operation
The machine can be operated with the On/Off button and output level control knob located
on the rear. When using On/Off Mode press and hold the button to make fog, release to stop.
In Continuous Mode, press button once to make fog press again to stop.
Dip Switch 1
OFF
ON
Rotary Knob
SMOKE
DMX Connector Pin Assignment
The machine provides 3-pin XLR connectors for DMX connection. The diagram below
indicates pin assignment information.
Function
On/Off Mode
Continuous Mode
Function
Turn haze on/off, adjust output volume from 0~100%
Pin
1
2
3
Function
Ground
Data-
Data+
8