Antari FT-20 Manuel D'utilisation page 20

Setting Up
Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm
open space around the machine.
Step 2: Fill the fluid tank with Antari approved fluid.
Step 3: Charge the battery by plug the charger adaptor into a grounded electrical outlet.
Yellow light on the adaptor indicates charging, when it turn green indicate charge complete.
Please note the battery require 15 hours charge time.
Plug in charger
Always connect the machine to a protected circuit and ensure it is properly
grounded to avoid risk of electrocution.
Step 4: Connect the battery base or power base to the machine. Turn on the machine to
start operation.
Yellow indicates charging
6
Green indicates charging
complete