Minebea Intec YDH03CIP Notice D'installation page 3

Installation
Purpose
For installing the Combics indicator on
a column.
Attach a base plate (YBP03CIS) to the
foot of the column if the column is not affixed
to the floor.
You can attach the bar code scanner retainer
(YBH01CIS) to either side of the column.
You can attach the printer retainer plate
(YPP01CIS) to either side of the column.
YDH03CIS:
● Loosen the front screw at the top of the column
(on the left in the illustration) until the indicator
retainer plate is released.
● Remove the screw from the turning grip and
remove the turning grip.
● Remove the indicator retainer plate from
the column.
Installation Instructions | Installationsanleitung
3
3