Adjusting The Pedal Position; Adjustment; Handles - Sunrise Medical Quickie Attitude Notice D'utilisation

4.0 Adjusting the Pedal Position

Adjustment:

The default position of the crank is based on data which dipicts
the average best fit. If this is not suitable for you, please contact
your authorized Sunrise Medical dealer.
The pedal position can be adjusted to the user, (arm length and
body position), by an authorized dealer in accordace with
available adjustment options,
WARNING!
• The cranks must not touch the knee or thigh while pedalling,
especially through bends.
• Do not allow the elbows to completely extend when the
crank handles are furthest away from the body.
• If you have poor seating stability, or weak trunk muscels, a
suitable restraint must be used. Please contact your
therapist, doctor or authorized dealer.
The pedal position can be adjusted at least 0- 50.0 mm forward
and 0 - 10 mm upward, (Fig.4.2).

Handles:

WARNING!
• The handles must be held firmly with both hands whilst
driving and held so that the cables always are oriented
upwards. Holding the cranks in a horizontal position or
upside-down will result in cable-damage.
• Cables should never be kinked or trapped, as this could
cause damage and loss of function.
Attitude/Attitude Hybrid Rev.E
Fig.4.1
Spacer
S1 = 15mm
S2 = 25mm
S3 = 35mm
Fig.4.2
69 mm
X
Fig.4.3
Docking Bottom
Position 1.
Docking Bottom
Position 2.
Fig.4.4
126 mm
Bottom Docking
Position 1
Fig.4.5
146 mm
Bottom Docking
Position 2
Docking Top Docking Top
Position 2 Position 1
Y
11