Start Menu; Selecting The Assistance Level - Sunrise Medical Quickie Attitude Notice D'utilisation

Start menu:

As described previously, when starting up, the start menu
illustrated in the accompanying image appears, (Fig.3.6).
Explanation:
6. Approximate value of the distance in km, which can be
covered at the preselected assistance level (remaining
range).
7. Indication of the current speed travelled.
8. Assistance level selection.
9. Set assistance level.
10. Recuperation selection.
11. Diverse varying information and warning indicators, see
section 3.2.11 (shown here as remaining battery capacity)
12. Display of various travelling information.
The letter "M" to set the menu functions in the left-hand lower
third of the display, is
only visible when at rest. For safety reasons, different functions
cannot be selected when travelling.
CAUTION!
• All parameters that you change will be permanently stored
and are available each time you switch on the sMMI. The
display of your add-on bike may therefore differ from the
illustration.

Selecting the assistance level:

(Fig.3.6-Fig.3.7).
An assistance level that you wish to use (there are 5 possible
levels) can be permanently stored by your specialist dealer as
part of a travel profile in the sMMI. This is instantly available to
you after switching on the sMMI and is shown in the sMMI
display as a bar element [9].
You can also manually change the level of assistance at any
time using the controller
buttons [1] UP and [3] DOWN, whereby the number of
individual white bar elements in the field [8] increases or
decreases according to the level of assistance you select.
When switching off the add-on bike, any changes made using
the controller buttons are not accounted for. In this respect,
when restarting the add-on bike, only the assistance level
stored in the travel profile is available.
According to the selected assistance level, field [6] gives an
indication of the distance that can be travelled using motorised
support. The higher the selected assistance level, the more
energy is consumed by the motor.
The range to be achieved reduces accordingly.
Attitude/Attitude Hybrid Rev.E
NOTE: When the add-on bike is idle please note:
• If the pushing aid is activated, you can adjust the assistance
levels from a travel speed of about 8 km/h.
• Motorised support is also immediately available when
activating the pushing aid by moving the pedals.
Exceptions:
After switching on the Add-on bike, the wheel must complete
2–3 wheel revolutions before the motorised support will start.
If the pushing aid is deactivated, the motorised support is
immediately available when moving the pedals.
Similarly, the assistance level can also be increased or
decreased when the add-on bike is idle.
The start menu field [12] has several features. By tapping the
controller button [2], various travel information can be displayed.
Fig.3.6
6
115
km
8
9
10
Fig.3.7
9
7
0
km/h
11
12
8
31