Delivery Package - Pulsar AXION Guide De Démarrage Rapide

ENGLISH

Delivery package

• AXION Thermal Imager
• APS3 rechargeable battery
• Battery charger with mains capability
• USB cable
• Case
Electromagnetic compatibility
This product complies with the requirements of European standard EN 55032: 2015, Class A.
Caution: Operating this product in a residential area may cause radio interference.
To begin operation
Switching on and adjusting the image
• Remove the lens cover (7). Secure the cover to the strap using the magnet
built into the cover.
• Turn the unit on with a short press of the ON/OFF button (5).
• Adjust the resolution of the icons on the display by rotating the dioptre
adjustment ring on the eyepiece (1).
• To focus on the object under observation, rotate the lens focus ring (6).
• Select the desired calibration mode in the main menu: Manual (M), Semi-
automatic (SA) or Automatic (A).
• Calibrate the image with a short press of the ON/OFF button (5) (where
calibration mode SA or M has been selected). Close the lens cap during
manual calibration.
• Adjust the brightness, display contrast and smooth digital zoom in the 'FAST
MENU FUNCTIONS' section.
• Turn the unit off with a long press of the ON/OFF button (5).
Units and controls
1. Eyepiece dioptre
adjustment ring
2. Down/Rec button
3. Menu button
4. Up/Zoom button
5. On/Calibration ON
button
6. Lens focus ring
7. Lens cap
8. MicroUSB connector
9. Battery release
button
1
ENGLISH
• Hand strap
• Quick start guide
• Lens cloth
• Warranty card
6 5 4
7 9 8
3 2 1
Fig.
1
LED indicator