RK Rose+Krieger S Clean Notice D'assemblage page 60

7. Life Phases 7. Life Phases 7. Life Phases
•
Observe the plug-in depth at the lug
•
Tighten the fixing screws alternately in a diagonal sequence
•
Max. operating speed n = 3000 rpm
Coupling installation – screw lug
•
Use the adapter disk centring lug in the hollow shaft of the toothed disk shaft
•
Tighten the fixing screws alternately in a diagonal sequence
•
Max. operating speed n = 3000 rpm
DIN EN ISO 4762 12.9
60 60 60
Clamping ring hub DIN EN ISO 4762 8.8
Screw lug