RK Rose+Krieger DuoLine S Notice D'assemblage page 73

•
Observe the plug-in depth at the lug
•
Tighten the fixing screws alternately in a diagonal sequence
•
max. operating speed n = 3000 rpm
Coupling installation - screw lug
•
Use the adapter disk centring lug in the hollow shaft of the toothed disk shaft
•
Tighten the fixing screws alternately in a diagonal sequence
•
max. operating speed n = 3000 rpm
DIN EN ISO 4762 12.9
Clamping ring hub DIN EN ISO 4762 8.8
Screw lug
7. Life Phases 7. Life Phases 7. Life Phases
73 73 73