System Setup Menu; Welcome; Video Settings - Polk Audio SurroundBAR 360 Manuel Du Propriétaire

SYSTEM SETUP MENU

System Setup/Using/Changing System Options
The SurroundBar360° DVD Theater comes with factory default settings that allow you
to simply hookup and play your system. However, The System Setup Menu enables you
to tailor your SurroundBar360° DVD Theater to your listening and viewing needs. You can
set console display settings, Digital Audio Input, Language and Subtitles. In addition, you
can change Video options for your television, as well as a few simple audio options for
your SurroundBar Speaker. Of course, you may choose "Default Settings" at any time.
All these choices are easy to make using your system's remote control. To make System
Menu choices, press the 360 Setup button found at the bottom of the remote control, and
use the buttons marked with arrows indicating up, down, left and right, and the ENTER
button. At any time you may exit the System Menu by pressing the "EXIT" button located
at the lower left of the Arrow buttons or by pressing the 360 Setup button again.
IMPORTANT NOTE: To access the System Setup Menu, no matter what source
the system is in, you must first press the DVD/CD source button and then press
the "360 Setup" button on your remote control.

WELCOME

The "Welcome" page appears on your television. The Compass Icon at the top left
represents the Welcome page.
Now notice the rest of the icons in the column at the left. These icons represent the
various settings—video, tone, device codes for the remote control, console settings
and parental controls—that you will choose for your viewing and listening requirements.
1. From the Welcome page, scroll down ( ) to the next icon, "Video Settings."
• The Video Settings Menu will appear.
1. Scroll right ( ) to highlight TV ASPECT RATIO.

VIDEO SETTINGS

• TV Aspect Ratio
The Aspect Ratio is the width of the picture on your TV relative to the picture's
height. There are two aspect ratios—4:3 (standard) and 16:9 (widescreen).
1. To choose the desired ASPECT RATIO, scroll right ( )
and highlight TV Aspect Ratio.
2. The menu to the right will become active, giving you two
ASPECT RATIO options: 4:3 (normal), 16:9 (widescreen).
3. Scroll up ( ) / down ( ) to choose the ASPECT RATIO.
4. Press ENTER to select.
Scroll to highlight another setting.
Scroll left ( ) to return to the Icon Column.
Or press EXIT to leave the System Menu.
• Brightness
Brightness adjusts the picture's overall level of brightness on a scale of from
one to sixteen, one being the lowest level and sixteen being the brightest.
1. To set Brightness, highlight BRIGHTNESS and scroll right ( ).
2. The sliding scale to the right becomes active, with the brightness
set in the middle of its range, 8.
3. Press the up ( ) / down ( ) buttons to adjust the brightness accordingly.
4. Press ENTER to select.
Scroll to highlight another setting.
Scroll left ( ) to return to the Icon Column.
Or press EXIT to leave the System Menu.
for more information visit our website at www.polkaudio.com 27