The Best Location For Your Surroundbar360° Dvd Theater; Mount The Speaker On A Wall; Locating The Speaker On A Shelf Or Stand - Polk Audio SurroundBAR 360 Manuel Du Propriétaire

THE BEST LOCATION FOR YOUR
SURROUNDBAR360° DVD THEATER
We recommend two locations for your SurroundBar Speaker—
either wall-mounted beneath your television, or resting in the
provided cradles on a stable surface beneath your television.
OPTION 1

Mount The Speaker On A Wall

1. Hold the speaker in your intended location to be sure
there are no obstructions.
2. Use the provided Wall Mount Template to mark the holes
for the wall anchors. We recommend trying to hit at least
one wall stud to ensure an extra secure installation.
3. Use a molly bolt or wall anchor if a second stud is not available.
Install screws and/or anchors.
4. Plug the speaker wire into the speaker connector on the back
of the SurroundBar Speaker.
5. Lift speaker, align the keyhole slots on the back of the speaker
with the wall anchors, and slide the speaker down until it seats
securely on the wall anchor screws.
6. Tug gently on the speaker while holding it from below to ensure
complete seating on the wall anchor screws.
OPTION 2

Locating The Speaker On A Shelf or Stand

1. Connect the speaker wire cable into the "Speaker Out" connection on the back
of the DVD Console.
2. Connect the speaker wire cable into the speaker connector on the back of the
SurroundBar Speaker. Rest the speaker on its cradles and angle the speaker
toward your listening position.
SurroundBar
Speaker System
2-piece High Cradle
The SurroundBar360° DVD Theater includes two high and two low cradles that allow
you to place your SurroundBar Speaker snugly and securely against today's modern TVs.
The stands accommodate a wide range of TV bases.
Television
(Top-Down View)
OPTION 1
Mount The Speaker On A Wall
Surround BAR 360 ® °
Speaker System Screw location for
speaker mounting
Please Note: The Power Connector will be located
on the left side of the SurroundBar Speaker
System when mounted on the wall.
Wall Mounting
Template
TV Base
High Cradle Shown
TV
Wall Mount Template Wall Mount Template
1. Determine speaker location. Center Point Point Central 1. Determine speaker location.
2. Hold or tape the Wall Mount Template in the 2. Hold or tape the Wall Mount Template in the
preferred location in a horizontal position. preferred location in a horizontal position.
3. Mark the holes for the mounting screws. 3. Mark the holes for the mounting screws.
4. Use a level to ensure the mounting holes align evenly. 4. Use a level to ensure the mounting holes align evenly.
5. Attach the mounting screws into the wall stud or, if 5. Attach the mounting screws into the wall stud or, if
directly into drywall, using wall anchors. Leave enough directly into drywall, using wall anchors. Leave enough
of the screw exposed so that the keyhole slots on the of the screw exposed so that the keyhole slots on the
SurroundBar Speaker will rest securely on the screws. SurroundBar Speaker will rest securely on the screws.
5. Plug the speaker wire cable connector into the 5. Plug the speaker wire cable connector into the
receptacle on the back of the SurroundBar Speaker. receptacle on the back of the SurroundBar Speaker.
6. Mount the SurroundBar Speaker onto the wall, ensuring 6. Mount the SurroundBar Speaker onto the wall, ensuring
the keyhole slots on the back of the SurroundBar the keyhole slots on the back of the SurroundBar
Speaker slide securely onto the screws. Speaker slide securely onto the screws.
Mark Screw
Location for Speaker
Mounting
for more information visit our website at www.polkaudio.com
Screw location for
speaker mounting
9