When Tv Is Selected Source - Polk Audio SurroundBAR 360 Manuel Du Propriétaire

DVD CONSOLE BUTTONS
volume volume
Note: See page 6 for button functions.
7
7
AUDIO SYNC
source source
• To Change A Preset Location:
Find station.
Choose a preset location by pressing CH/PRST ( / ) buttons.
Press ENTER button.
• To Scroll Through Presets:
Use the CH/PRST ( / ) buttons to scroll through your preset selections.
The station frequency will be displayed with each preset location.

WHEN TV IS SELECTED SOURCE

7
Note: The remote needs to be programmed with your TV's code
for these functions to work.
• TV Source—Select TV as a source (if not already done).
• TV Power—Press the TV POWER button to turn your television on.
(If it is not already on and the remote is setup to control the TV.)
• TV Input—Press the TV INPUT button to select input from different
TV video sources (Video1, Video 2, Video 3) if required.
• CH/PRST—Press the CH/PRST ( / ) buttons to move up and down
television channels.
• Numeric Keypad—Use the NUMERIC KEYS to input a TV channel directly.
• PREVIOUS—Press the PREVIOUS button to go back to the TV channel
you were watching immediately before.
• TV ASPECT RATIO—Press the TV ASPECT RATIO button to toggle through
aspect ratios on your TV.
• AUDIO—Press the AUDIO button to change the TV audio track (if available).
• SUBTITLE—Press the SUBTITLE button for language and Close
Caption options (if available).
• GUIDE—Press GUIDE to access program guide.
• MENU—Press MENU to access TV OSD (On Screen Display).
• INFO—Press INFO to access TV channel information (if available).
• EXIT—Press the EXIT button to leave the TV Menu/Guide/Info.
• ARROWS—Press the up/down ( / ) and left/right ( /
to scroll through TV menu options or channels (if available).
for more information visit our website at www.polkaudio.com
) arrows
23