Set-Top Box As Source - Polk Audio SurroundBAR 360 Manuel Du Propriétaire

FIGURE 12a

SET-TOP BOX AS SOURCE

Wall Cable
1
Coax Input Optical Output
Set-Top Box
SET-TOP BOX AS SOURCE
Connect a Video Coax (RF) Cable/Satellite TV cable from the wall
1
to the Set-top Box.
OPTICAL DIGITAL AUDIO CONNECTION
From the back of Set-top Box to the DVD Console:
Connect one end of the Optical Digital Audio Cable to the Optical Output
2
on the Set-Top Box. Connect the other end of the Optical Digital Audio
Cable to the CBL/SAT Optical Digital Audio Input on the DVD Console.
Note: Different audio connections can be used if available.
FIGURE 12b
IF YOU HAVE A CONVERTER BOX
CONVERTER BOX CONNECTION
Note: If you have a converter box, use the hookup procedure show below.
From the Converter Box to the television:
Connect an RF Cable from the Converter Box (Video Output) to the television
(Video Input), if needed. Otherwise, connect directly to the TV.
14 Contact Polk Audio Customer Service: 1-800-377-7655 (Worldwide: 1-410-358-3600) Monday-Friday, 9:00 AM-6:00 PM Eastern Time, polkcs@polkaudio.com
2
S-Video Ouput
(Figure 12a)
(Figure 12b)
3
S-Video Input
TV
S-VIDEO CONNECTION
From the back of the Set-Top Box to the DVD Console:
Connect the S-Video Cable to the CBL/SAT S-Video Input. Connect
3
one end of the S-Video Cable into the Set-top Box S-Video Output.
From the back of the DVD Console to the TV:
Connect another S-Video Cable to the DVD Console's S-Video Output.
4
Connect the other end of the S-Video Cable to the TV S-Video Input.
Note: Different video connections can be used if available.
Video Input Video Output
Converter Box
4
Video Input
TV