Test Sewing; Setting Foot Pressure; Controlling Sewing Speed; Waste Tray - Janome 1200D PROFESSIONAL Manuel D'instructions

SECTION IV

Test Sewing

Setting Foot Pressure

The standard setting is position 5. The dial may be
changed to increase or decrease the foot pressure
depending on the type of fabric. There are six
positions.

Controlling Sewing Speed

Sewing speed varies with the foot control. The harder
you press on the foot control, the faster the machine
runs.

Waste Tray

Attach the waste tray to the front cover. The tray will
catch fabric scraps that are cut off.
74