7 . OPERATION
To stop the alarm, press the Enter key on the remote control, or key 7 on
the radio.
To do this, go to Settings and select the menu item Mode, and switch the
operating mode to radio alarm here. (Chapter 7.1.1.)
7.1.6. Timer
E
The timer allows you to set a time at the end of which the radio will sound an
alarm.
To do this, use the
▸ ◂
keys to enter the time in minutes and seconds. Pressing
the key repeatedly will increase or decrease the time in one-second steps, hold
the
▸
or
◂
key down for longer to scan forward or backward through time.
Confirm your entry by pressing ENTER.
7.1.7. Language
Here you can set the menu language of the radio.
7.1.8. Dimmer
The dimmer function allows you to adjust the brightness of the display. The
radio is set to the highest level of brightness at the factory. Use this menu
item to individually adjust the brightness.
Operating Manual
58