Network Configuration; Network Selection - Telestar imperial i110 Manuel D'utilisation

6 . INSTALLATION
6.4. Checking the network
If you wish to connect the radio to your home network, confirm the question
displayed by pressing Yes. If this setting is selected, the radio will check for
available networks each time it is switched on.
E

6.5. Network configuration

To connect your radio with the network, confirm the question displayed by
pressing Yes. If you do not wish to connect the radio with a network, you can
bypass this menu item by selecting No.

6.5.1 Network selection

Select the type of connection to be used to connect the radio with a network.
To establish a connection (WiFi) select Wireless Network.
When selecting a connection via W-LAN (wireless network) all available net-
works will be displayed. Select the network with which the connection is to be
established.
Enter the WiFi key. Use the
the ► key.
Confirm the entry by pressing ENTER.
Press the Menu key on the radio or on the remote control to go to the main
menu of the radio. The radio will automatically close the menu after 10
seconds, and will revert to the radio mode previously selected. A display in the
bottom right-hand corner will show the seconds, counting backwards. You can
navigate around the menu using the
consists of the following menu items:
Operating Manual
▼▲ keys to select a symbol, continue by pressing
▼▲ ►◄ keys. The main menu of the radio
54