S8 Data Management Products; Using A Blank Module; Using The Res Scan Data Card Module; Patient Management Of The Data Card - ResMed S8 Elite Manuel

338210r3 Eng.book Page 37 Monday, July 11, 2005 1:28 PM
S8 D M
ATA ANAGEMENT
Note: Do not remove data management products from the S8 Elite while power is
connected.
The will have one of two modules fitted to the back:
S8 E
LITE
blank module
•
Data Card module.
•
Serial and USB adapters are also available, for transferring data to a PC.
U B M
SING A LANK
The blank module is a protective cover on the
remove or attach the module, for example to use an adapter.
To remove the blank module, pull it off the back of the
communications port (F-1).
To attach the blank module, push the blank module onto the data communications
port, until the module clicks into place (F-2).
Note: To protect the data communications port, always ensure there is a module
attached to the back of the device.
U R S
SING THE ES CAN
The ResScan Data Card module is a convenient way of gaining remote access to the
data stored in the
module is for home and hospital use. This module uses the ResScan Data Card for data
collection and transmission.
Note: Patient compliance data stored in the S8 Elite remains unchanged when copied to
the Data Card.
If a patient has an
Card to retrieve data or update settings that are stored in the
If a patient has an
Card, you can order a Data Card starter pack from ResMed. This pack contains a Data
Card module and Data Card.
1. Remove the blank module from the
2. Attach the Data Card module to the
3. Follow the instructions for inserting the Data Card (page 40).
P M
ATIENT ANAGEMENT OF THE
CAUTION
!
Always supply the Data Card and mailback envelope in the supplied bubble mailer
envelope to protect the Data Card during transport. Advise the patient to use the
bubble mailer when returning the Data Card and mailback envelope by mail.
P
RODUCTS
ODULE
D C M
ATA ARD ODULE
, and of updating the settings in the
S8 E
LITE
with a Data Card module attached, they can use a Data
S8 E
LITE
with a blank module attached, and they need to use a Data
S8 E
LITE
S8 E
S8 E
D C
ATA ARD
. At times, you may wish to
S8 E
LITE
to show the data
S8 E
LITE
. The Data Card
S8 E
LITE
S8 E
LITE
F-1).
(
LITE
G-1).
(
LITE
S8 D M
ATA ANAGEMENT
.
37
P
RODUCTS