Balance Data Editor - SI Analytics TitroLine 6000 Mode D'emploi

165
Chapter 7 – Connection of Analytical Balances and Printers

7.2 Balance data editor

Pressing the die <F5/balance symbol > function key will invoke the so-called balance data editor.
A list with the existing balance data will appear:
Fig. 135
The balance data can be edited one by one. Following a change, a cross will appear opposite the weighed-in
quantity:
Fig. 136
Weights may be deleted or added individually. It is also possible to delete all weights at one stroke.
Fig. 137
If no balance data is available, the "No balance data found" message will appear: