Balance Data Editor - SI Analytics TITRONIC 500 Mode D'emploi

Chapter 7 – Connection of Analytical Balances and Printers
106

7.2 Balance data editor

Pressing the die <F5/balance symbol > function key will invoke the so-called balance data editor.
A list with the existing balance data will appear:
Fig. 92
The balance data can be edited one by one. Following a change, a cross will appear opposite the weighed-in
quantity:
Fig. 93
Weights may be deleted or added individually. It is also possible to delete all weights at one stroke.
Fig. 94
If no balance data is available, the "No balance data found" message will appear.: