SI Analytics TitroLine 6000 Mode D'emploi page 102

102
Chapter 2 - Unpacking and first Operation
When used for the first time, it is recommended to enter here at least the name of the reagent being used. To do
so, confirm the "Reagent"selection with <ENTER>, then type the name and possibly the concentration (fig. 12).
Fig. 12
Press <OK>/<ENTER> to confirm (fig. 12). Following the optional input of additional parameter, press <ESC> to
leave the reagents menu (fig. 13).
Fig. 13
You will be prompted for a confirmation of the values (fig. 14):
Fig. 14