SI Analytics TitroLine 6000 Mode D'emploi page 148

148
Chapter 4 Method Parameters
Fig. 100 k
Fig. 100 l
The start time and the time period are set automatically during parameterization of the total duration. However, it
is possible to enter a different start time and time period. However, no time period > can be entered as the total
time. If it is necessary to increase the Start time, the Time period must also be changed.
Fig. 100 m
The start time always begins when the desired pH is reached. If, for example, the target pH is reached after 25
seconds, and the start time is 15 seconds, the evaluation begins at 40 seconds.
Fig. 100 n