SI Analytics TitroLine 6000 Mode D'emploi page 114

114 ®
Chapter 3 – Working with the titrator TitroLine 6000/7000
The titrator will ask you to rinse the electrode and immerse it successively into 2 or 3 buffers.
Fig. 38
st nd rd
The 1 buffer is started with <Start>. The 2 and 3 buffers (optional) are to be started with <Enter/OK>. During
calibration, you can view the current mV and temperature values of the buffer:
Fig. 39
Fig. 40
Fig. 41