Printer; Device Information; System Tone - SI Analytics TitroLine 6000 Mode D'emploi

5.7 Printer

For connecting printers please refer to chapter 7.3.
Fig. 127

5.8 Device Information

<Device Information> contains information about
• the current software version
• the serial number of the device
• printer driver and update version
• device address
• number of measurements (Starts of a method)
• a number of strokes/filling cycles
Fig. 128

5.9 System Tone

This is the point to set the volume of the system sounds and the front keyboard of the device. The system sounds
become audible e.g. at the end of the titration or in case of an erroneous operation. The keys of the front
keyboard produce a clicking sound if the key was used successfully.
Chapter 5 - System Settings
159