Spektrum PowerSafe AR9110 Manuel D'instructions page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
• 35% aerobatic plane with dual NiMH batteries and three remote receivers
• 40% aerobatic plane with dual LiPo batteries, dual regulators and four
remote receivers
• Jet with dual LiPo batteries, dual regulators and four remote receivers
Plugging in the Servos
Plug the servo leads into the appropriate ports in the PowerSafe.
You are now ready to bind the system.
Important: Y-Harnesses and Servo Extensions
When using Y-harnesses or servo extensions, it's important to use standard
non-amplified Y-harnesses and servo extensions as this can/will cause the
servos to operate erratically or not function at all. Amplified Y-harnesses
were developed several years ago to boost the signal for some older PCM
systems and should not be used with Spektrum equipment. Note that
when converting other models to Spektrum be certain that all amplified
Y-harnesses and/or servo extensions are replaced with conventional,
non-amplified versions.
The JR PCM Y-Harness with Amplifier (JRPA133) is not compatible
with the AR9110 and should not be used.
14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ar9110 powersafeSpmar9110

Table des Matières