Dustbane Hurricane 700 XTT Manuel D'opération page 7

ig./Abb./ Рис 1 Fig. 3
Unpack the machine in the following way:
• Cut and remove the plastic straps with scissors or nippers;
• Remove the cardbox;
Keep one of the 2 keys safe so that it can be located in case the other one is lost; the other key is to be inserted in the lock on the mushroom
switch.
• Depending on the model, remove the metal brackets or cut the plastic straps, which fix the machine chassis to the pallet;
• Disengage the parking brake via the pedal (ref. C fig. 3);
• Let the machine slide down the pallet on an inclined plane, by pushing it into reverse;
• Unwrap the brushes/rollers (fig. 5, ref. 1) and the squeegee (fig. 5, ref. 2) from their packing;
• Clean the outside of the machine observing the safety rules;
• After unpacking the machine, you can install the batteries: see respective paragraphs.
If necessary, preserve the wrapping material as it could be used again to protect the machine in the event of a move or if the machine
should be sent to a service centre for repair. Otherwise, the material must be disposed of in compliance with the laws in force.
Feeding Batteries
Fig./Abb./ Рис 5
Fig./Abb./ Рис 6
Fig./Abb./ Рис 2
Fig./Abb./ Рис 4
Fig./Abb./ Рис 3
Fig. 6
Fig./Abb./ Рис 6
Fig. 7
Fig./Abb./ Рис 7
Fig./Abb./ Рис 8
Fig./Abb./ Рис 3
Fig. 5
Fig./Abb./ Рис 5
Fig./Abb./ Рис 7
Fig./Abb./ Рис 9
7