Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Clean the squeegee blades, checking that they are not excessively worn; replace them, if necessary;
•
Make sure that the squeegee suction hole is not clogged, freeing it from any encrusted dirt;
•
Recharge the batteries according to the procedure described above.
Weekly Maintenance
•
Clean the floating rod of the recovery tank and check that it works correctly;
•
Clean the suction air filter and check that it is not damaged (replace it, if necessary);
•
Clean the solution filter placed at the front opening of the solution tank (fig. 2, ref. 3) and check that it is not damaged (replace
it, if necessary);
•
Clean the suction tube;
•
Clean the recovery tank and the solution tank;
•
Check the level of the electrolyte in the batteries and top up with distilled water, if necessary.
Basket Filter: Cleaning
•
Unhook the recovery tank (fig. 2, ref. 2) from the solution tank (fig. 2, ref. 3) acting on the blocking hook (fig. 7, ref. 1), placed on
front of the machine;
•
Lift the recovery tank, by making it turn backwards around about 90°;
•
Take out the basket filter located at the front of the machine;
•
Clean the filter under running water or with the detergent used in the machine;
•
Refit the filter in the support and ensure that you have correctly repositioned it;
•
Insert back the tank unit in its work position and hook it to the solution tank by means of the fixing hook (fig. 7, ref. 1).
Semi Annual Maintenance
•
Have the electric system, calibrations checked by qualified staff;
How To Order Spare Parts
For a correct identification of the spare part(s) you need and, therefore, to help us serving you better, please fill in your orders with
the following data:
•
Machine model;
•
Machine serial number on the identification plate (see fig. 1);
•
Chart of the list of spare parts in which the item and its reference number are found;
•
Code of the item to be found in the list of spare parts;
•
Amount ordered.
If you ask for a replacement under warranty terms, the order must be completed with a brief description of the fault.
Troubleshooting
How To Overcome Possible Failures
The emergency button is pressed or faulty.
The batteries are flat.
The battery connector microswitch is out of calibration or faulty. Calibrate or replace.
The machine does not work.
CAUSE
PROBLEM:
Insert the key, turn and release or replace the button.
Recharge the batteries.
SOLUTION
19
Publicité
Table des Matières
