Changing The Image Tone/Aspect Ratio (Video Menu Mode Only) - JVC DLA-M2000LU Manuel D'instructions

(QJB'/$0ERRN 3DJH  7KXUVGD\ $XJXVW     $0
Menu Operations

Changing the Image Tone/Aspect Ratio (Video Menu Mode Only)

The image tone (TV or Cinema) and the aspect ratio (4:3 or 16:9) are selectable in Video menu mode.
1
Press the MENU button.
The main menu appears on the screen.
2 Select "Setting" with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER button.
The "Setting 1" submenu appears on the screen.
Video submenu
Setting 1
Position ENTER
Tone
Aspect change
Decoder ENTER
Setting 2
ENTER
Decoder is only displayed when there is a signal for the Video IN terminal.
3 Select "Tone" or "Aspect change" with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ .
4 Adjust the image tone or aspect ratio with the cursor 2 2 2 2 or 3 3 3 3 .
*To adjust multiple items, repeat 3 and 4.
Adjustment item
Tone
Aspect change
* : Factory set value
5
Press the ESCAPE button to return to the previous menu or press the MENU button
to exit the menu mode.
50
TV Cinema
4:3 16:9
Button
The image tone projected on the screen can be changed.
2 or 3
TV* : Suitable for projecting the video programs.
Cinema : Suitable for projecting the cinema programs.
Sets the vertical-to-horizontal ratio (4:3 or 16:9) of the video image projected.
"4:3*" : The aspect ratio of the projected image becomes 4:3. Set it to 4:3 for video
2 or 3
of NTSC, NTSC4.43, PAL, SECAM.
"16:9" : The aspect ratio of projected image becomes 16:9. Set it to 16:9 for Hi-
Vision devices (W-VHS VCR, etc.).
DLA-M2000LU/M2000SCU/ LCT0940-002A / ENGLISH
Adjustment content