Turning Off Image And Sound (Hide); Removing The Trapezoidal Distortion Of The Image - JVC DLA-M2000LU Manuel D'instructions

(QJB'/$0ERRN 3DJH  7KXUVGD\ $XJXVW     $0
Basic Operations
I Projector's buttons
LAMP
HIDE
button
KEYSTONE
KEYSTONE
/ button
PRESET
PRESET
button
ESCAPE
button
ESCAPE
I Remote control unit
FREEZE
HIDE
PRESET PRESET
button
ESCAPE VIC SELECT
ESCAPE
button
+
DIGITAL
ZOOM KEYSTONE
–
U T
SHIFT ZOOM
D W
+
QUICK
SHUTER ALIGN.
–
RM-M2000 REMOTE CONTROL UNIT
34
STAND BY
TEMP
OPERATE
HIDE
PC
VOLUME
VIDEO
MENU
ENTER
OPERATE
HIDE
MENU button
PC
KEYSTONE
VIDEO
/ button
+
FOCUS
–
+
VOLUME
–
DLA-M2000LU/M2000SCU/ LCT0940-002A / ENGLISH

Turning off Image and Sound (HIDE)

Video image and audio sound can be temporarily turned off.
Press the HIDE button once:
Video image and audio sound instantly turn off.
Press the HIDE button again:
Video image and audio sound come on again.
Remote control unit
HIDE
Note
• When the projected image input is changed, the HIDE
function is canceled and the image and sound return.
Removing the Trapezoidal Distortion of
the Image
If the image projected on the screen is distorted in trapezoid
form, correct it with the KEYSTONE buttons on the projector.
When the KEYSTONE button is pressed, "Keystone"
appears on the screen together with the level bar and set
value (–80 to 128). When "15 sec." is displayed in the menu,
"Keystone" will appear in approximately 15 seconds.
Keystone 123
When you press the KEYSTONE
The trapezoid form is corrected as shown in the figure.
When you press the KEYSTONE
The top bottom inverted trapezoid form is corrected as
shown in the figure.
* To cancel correction and restore the original screen, press
the PRESET button. (Adjusted value:0)
* Press the ESCAPE button to immediately remove the
keystone display.
Remote control unit
KEYSTONE
Projected image with trapezoidal distortion
Notes
• The trapezoidal distortion (keystone) can be adjusted from the
option menu. (Refer to page 52.)
• The range of the trapezoidal distortion adjustment is
approximately 20° in the vertical direction.
• Interference patterns may appear on the screen when
adjusting the keystone. This is not a malfunction.
• Depending on the type of signal, some noise may appear in
the picture when the keystone is adjusted.
This is not a malfunction.
Projector
HIDE
button:
button:
Projector
KEYSTONE
KEYSTONE
KEYSTONE