Skandika Fitness Regatta Pro Neptun Instructions De Montage Et Mode D'emploi page 19

Step 3
Fasten the front horizontal stabilizer (42) to
the main frame (46) by using the two carria-
ge bolts (M8x50) (48), the curved u-shaped
washers (43) and the cap nuts (M8) (62).
Step 5
Fasten the rowing bar (12) to the main frame (46), connect the cable ends of the main frame (46) and
the rowing bar (12) by connecting the plug contacts (26, 52).
Fixate the rowing bar (12) and the main frame (46) with help of the lens head bolts M6 female screw
thread (28) and the lens head screw (M6x10) (51). Put the security pin (27) through the prefabricated
holes and screw on the fastening knob (31).
ASSEMBLY INSTRUCTIONS
Step 4
Fasten the mount support (71) to the main
frame (46) with two cylinder head Inbus
screws (M8*16) (20).
19