Programmed Maintenance; Recommended Brushes - ADIATEK sapphire 65 Emploi Et Entretien

GB

PROGRAMMED MAINTENANCE

INTERVENTION
RECOVERY TANK CLEANING
SUCTION FILTER CLEANING
SOLUTION TANK FILTER CLEANING
BRUSHES CLEANING
BRUSHES DISASSEMBLY AND CLEANING
SQUEEGEE CLEANING
FRONT SQUEEGEE RUBBER REPLACEMENT
REAR SQUEEGEE RUBBER REPLACEMENT
SPLASH GUARD RUBBER REPLACEMENT
CHECK SQUEEGEE ADJUSTMENT
SQUEEGEE HOSE CLEANING
SOLUTION TANK CLEANING
CHECK BATTERIES ELECTROLYTE
CHECK OF THE BRAKE
TRACTION MOTOR CHECK
BRUSHES MOTOR CHECK
SUCTION MOTOR CHECK
CHECK BRUSHES BASE GROUP
SCREW TIGHTENING
* The hours refer to the ones indicated on the display (see under paragraph "HOUR METER").

RECOMMENDED BRUSHES

Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristles diameter are the elements that distinguish different types of brushes.
MATERIAL
PPL (Polypropylene)
NYLON
TYNEX
BRISTLES THICKNESS
PAD HOLDER
MACHINE CODE
sapphire 65
48903020
48903030
48903040
48903050
48803010
48803030
48803040
sapphire 85
48903120
48903130
48903140
48903150
48803020
48803050
48803060
CHARACTERISTICS
Good wear resistance. Maintains characteristics with hot water up to 60°C. It is not hygroscopic.
Excellent wear resistance, even with hot water over 60°C. It is hygroscopic. It looses its physical characteristics over the time.
Nylon bristles with grains of abrasive material. Use with caution in order not to mark the floor or ruin the polishing.
Thicker bristles are more rigid and must be used on smooth floor or floor with small joints. On irregular floors with deep joints or
relieves, it is recommended to use softer bristles which penetrate more easily and deeper. Please be aware that when brush bristles
are worn out and therefore too small, they become rigid and unable to penetrate and clean deeper. This may also happen with
thicker bristles creating brush vibration.
It is equipped with anchor points which permit the blocking of the abrasive pad during work. The pad is recommended to clean
smooth floors.
QUANTITY DESCRIPTION
2 Brush PPL 0,6 Ø 345
2 Brush PPL 0,9 Ø 345
2 Brush TYNEX Ø 345
2 Brush 5-mix Ø 345
2 Pad holder Ø 330
2 Pad holder Ø 330 + center lock green
2 Pad holder Ø 330 + center lock black
2 Brush PPL 0,6 Ø 430
2 Brush PPL 0,9 Ø 430
2 Brush TYNEX Ø 430
2 Brush 5-mix Ø 430
2 Pad holder Ø 425
2 Pad holder Ø 425 + center lock green
2 Pad holder Ø 425 + center lock black
DAILY 20 HOURS *
•
•
•
•
•
•
•
•
•
•
•
USE
Normal floors.
Smooth floors with small joints and persistent dirt.
Floors of resistant material and particularly dirty.
For all types of floors.
For pads of 14", for smooth surfaces cleaning.
For pads of 14", for smooth surfaces cleaning.
For pads of 14", for smooth surfaces cleaning.
Normal floors.
Smooth floors with small joints and persistent dirt.
Floors of resistant material and particularly dirty.
For all types of floors.
For pads of 17", for smooth surfaces cleaning.
For pads of 17", for smooth surfaces cleaning.
For pads of 17", for smooth surfaces cleaning.
31
200 HOURS * 1000 HOURS *
•
•
•
•
•
•
•
•
GB