Switching On - Videotec HOV Hi-PoE IPM Manuel D'instructions

HOV HI-POE IPM AVAILABLE MODELS AND FEATURES
Operating Injector
temperature
-10°C / +60°C PoE classe 3
(14°F / 140°F) (13W)
Hi-PoE class 4
(25W)
-10°C / +50°C PoE classe 3
(14°F / 122 F°) (13W)
Hi-PoE class 4
(25W)
-30°C / +50°C Hi-PoE class 4
(-22°F / (25W)
+122°F)
Hi-PoE class 4
(25W)
Tab. 3

8 Switching on

The automatic pre-heating (de-ice) process
could be started whenever the device is
switched on and the air temperature is
below 0°C. This process is used to ensure
that the device works properly even at
low temperatures. The duration ranges
between 60 and 120 minutes, depending
on conditions.
During the lighting phase the device reads the
status of the dip switch and automatically detects
all the connected options for the correct energy
management of the housing.
Camera Demisting
system
PoE max. class
p
2 (7W)
PoE max. class
p
3 (13W)
PoE max. class
p
2 (7W)
PoE max. class
p
3 (13W)
PoE max. class
p
3 (13W)
PoE max. class
p
3 (13W)
Illuminator Heating
– –
–
p
– –
–
p
–
p
–
p
The 6 LEDs shown in the figure allow to check the
product's operating status.
Fig. 15
Refer to the table to identify the operating status.
Anti-icing Fan with
heated glass double air
filter
–
p
–
p
– –
– –
– –
–
p
9