BD ClipVac Presurgical Hair Removal System Mode D'emploi page 4

7
SN: 00 00 000
4
Step 6. Turn ON the vacuum unit by
flipping the switch �
Note: Ensure BD Surgical Clipper is turned
ON prior to starting clipping procedure�
Step 7. While holding loose skin taut, clip
hair using a slow steady forward motion
avoiding downward pressure�
Note: The bottom side of the clipper
blade should remain flat and gently rest
on the surface of the skin while clipping�
To ensure hair is properly collected by the
vacuum, never tilt the blade edge into
the skin�
Note: For optimal performance, use on
dry hair�
Step 8. When clipping is complete, turn
OFF unit and gently twist the filter body
to remove disposable filter assembly
away from the vacuum unit�
Note: The BD ClipVac™ Vacuum Unit may be placed on the bed next to the patient or
secured to the bedrail�
Step 9. Discard filter body into general
waste and recycle nozzle and tubing
according to local regulations� To detach
the filter body from the tubing, pull with
a gentle twist�
Step 10. After disinfecting and/or manual
cleaning, place vacuum unit in the
designated area for next use� If necessary,
return battery to the charging adapter�