Test The Power Control (On/Off); Connect A Game Console Or Camcorder; Use The Ir Repeater Out - Pioneer KURO KRP-600M Mode D'emploi

Use Other Equipment With Your Flat Panel Display
06
6.5.4

Test the Power Control (On/Off)

Your flat panel display provides the KURO LINK option to test whether equipment connected to the panel via an
HDMI port can power up. Each device must be properly assigned to an Input for this function to perform.
To confirm that the Power On/Off control function is working, follow the steps below.
1 ) Access
2 ) Select a test option (Power On Test or Power Off Test) from the submenu.
A list containing all HDMI connected equipment appears.
3 ) Select a piece of equipment from the list to begin the test.
4 ) Repeat this process to test other equipment from the list.
5 ) Press EXIT to exit the menu when all testing is complete.
If the Power On/Off Test fails, check the connection points and the settings.

6.6 Connect a Game Console or Camcorder

Your flat panel display supplies direct connections for a game console, camcorder, or other Audio/Visual (AV)
equipment through INPUT 1. To watch an image coming from a game console or camcorder, press INPUT 1 on
the remote control or repeatedly press INPUT on the panel to select INPUT 1. For details on game console
settings, refer to "2.6 Connect to Other Devices (DVR, Receiver, BDR, etc.)" and to "5.1.4 Set the Panel to
Recognize a Game Console."
Use the connection type specified by the equipment. Connect equipment only to terminals that are actually to be
used.

6.7 Use the IR REPEATER OUT

Connecting control cables between the flat panel display and other Pioneer equipment allows you to operate the
connected equipment via commands from the remote control.
This function is helpful when controlling Pioneer equipment from other Pioneer equipment.
66
En
KURO LINK
Setting through the Control Setup menu.