Check The Location For Suitability - Pioneer KURO KRP-600M Mode D'emploi

Install Your Flat Panel Display

2.3 Check the Location for Suitability

When choosing the location for your panel, there are several factors to keep in mind. The installation site should
be out of direct sunlight and have sufficient ventilation around the flat panel display to allow cooling. The diagram
below is an example of a stand-mounted panel with proper ventilation.
Over
10 cm
(3 15/16
inches)
Use the checklist below to judge possible installation sites.
Sufficient ventilation
Safe from excessive vibrations
Away from air conditioners
Free of moisture or dampness
No danger of splashing water
Route cords and cables safely
For specific cautions and safety information, refer to "8.2 Physical Location & Temperature Considerations" and
"8.8 Safety Precautions."
Over 50 cm
(19 11/16 inches)
Table top stand
(optional)
The distance behind and above the panel
changes depending on your choice of mount.
Consult with your dealer or professional
installer for proper ventilation.
No danger of power overloads
Separate from other IR equipment
Protected from hits or shocks
Distance from heat sources
Out of direct sunlight
Away from strong lighting sources
02
15
En