Event Notification - Pioneer KURO KRP-600M Mode D'emploi

Use Other Equipment With Your Flat Panel Display
06

Event Notification

Your flat panel display can provide E-mail notification if there is a system error or malfunction.
Model
Name
Location :
Top
Detail Settings
Picture
Terminal
Functions
Network Settings
Network
E-mail
ISF
Note: Your flat panel display does not have a function that determines the name of network computer within the
Internet. Enter your mail server's IP Address in the Mail server (SMTP) box. If the IP Address is not known,
use a search program such as the "nslookup" on your PC.
72
En
:
******
Sender address
:
******
Mail server(SMTP)
******
******
Authentication
ID
Password
Received address (1) :
Received address (2) :
Received address (3) :
Event option
Option
Sender address enters the sender's address
Mail server (SMTP) enters the sender server's IP address
Authentication sets whether to authenticate when sending an E-
mail (Pop before SMTP is set for the authentication
method)
ID enters an authentication ID
Password enters a password for authentication
Received address (1) - (3) enters the recipient address
Event option
Power down sends an E-mail when the fail-safe function is
activated due to a panel error that may cause a
malfunction
Shut down sends an E-mail when the protection function turns
the panel off automatically
Usage time sends an E-mail at a specified interval (every 500
hours if set to "500")
Input change sends an E-mail when the input mode changes
Loss of input signal sends an E-mail when no input signal appears
Power toggle sends an E-mail when the power status changes
E-mail
Web control system
:
:
:
ON OFF
:
:
:
Power down ... Panel error
Shut down ... Temp.,speaker and fan error
Usage time ... Every 1000 hours
Input change
Loss of input signal
Power toggle
Set TEST MAIL
Description