Use Other Equipment With Your Flat Panel Display
On-screen Display
This option sets the menu display to On or Off.
Parameter
On*
Off
Note: This setting applies to all input sources.
Power On Mode
This option automatically selects the input and volume level when the panel is turned On.
Parameter
Input
Volume Last*
Note: This setting applies to all input sources.
Mirror Mode
This option reverses the image displayed on the screen.
Parameter
On
Off*
Note: This setting applies to all input sources.
Banner PIP
Use the Banner PIP option to adjust the translucence rate and display positions of the small window in P-in-P
mode.
• Translucent: adjusts the translucent rate of the small screen in P-in-P mode between Off and 80%. If the
percentage increases, the translucent rate also increases.
• Banner PIP: adjusts the display positions of the small screen in P-in-P mode
displays the current menu when pressing DISPLAY
does not display the screen when:
• pressing DISPLAY or AV SELECTION
• switching the input source
• adjusting the volume
(Screen components such as Home Menu, User
Menu and messages remain on the screen even
when setting the On-screen Display option to Off.)
INPUT 1 through
displays the selected input
INPUT 6
Last*
displays the last input selected
selects the last volume level
0 - 60
selects the volume level between 0 - 60
reverses the image
does not reverse the image
Description
*Factory default
Description
*Factory default
Description
*Factory default
06
77
En