Turn On The Image Orbiter; Trigger The Screen-Saving Video Pattern Periodically; Activate Energy Save To Reduce Power Usage - Pioneer KURO KRP-600M Mode D'emploi

Basic Picture and Sound Adjustment
4.2.4

Turn On the Image Orbiter

A built-in feature to protect against burn-in is the Orbiter function. Orbiter slightly changes the position of the
picture while the image is on screen.
To activate Orbiter, follow the steps below.
Orbiter
1 ) Access
Mode 1 Mode 2
2 ) Select ,
• AV source Mode 1: for any screen mode except Dot by Dot
• AV source Mode 2: for all available screen modes
• PC source Mode 1: to enable Orbiter
• PC source Mode 2: to smooth the text/character appearance
3 ) Press HOME MENU to exit the menu.
Note: The farthest edges of an image may be hidden at times as the picture position shifts. Also, when the Orbiter
function is set to Mode 1 or Mode 2, the image may appear to drop slightly on the screen.
4.2.5

Trigger the Screen-Saving Video Pattern Periodically

The Video Pattern function causes the screen to appear white, which helps to alleviate after-image ghosts or burn-
in. While the Video Pattern screen is on, only the remote's MONITOR (a) button and the panel's STANDBY/ON
button are available. The panel automatically switches to Standby one hour after running the Video Pattern
screen. To cancel the Video Pattern screen, press the remote's MONITOR (a) or press the panel's STANDBY/ON
button.
To activate the Video Pattern screen, follow the steps below.
Video Pattern
1 ) Access
A confirmation screen appears.
2 ) Select Start from the submenu.
The Video Pattern screen appears.
3 ) Leave the panel alone for a minimum of one hour.
Note: The Video Pattern timer has priority over Sleep Timer, No Signal Off, and No Operation Off (Power
Management) settings.
4.2.6

Activate Energy Save to Reduce Power Usage

The Energy Save option decreases picture brightness and lowers power consumption. The recommended setting,
Save 1, extends the life of your panel while keeping power usage at a minimum.
Follow the steps below to activate an Energy Save option.
Energy Save
1 ) Access
2 ) Select an option from the Energy Save submenu.
Standard
Save 1
Save 2
Picture Off
3 ) Press HOME MENU to exit the menu.
Note: To deactivate the screen, select Picture Off.
Option
through the menu.
or Off.
Option
through the menu.
Power Control
through the
Option
No effect
consumes less power than Standard
consumes less power than Save 1
activates Picture Off when closing the Home Menu
with this option selected
.
menu
Description
04
33
En